All Molds are made to order.

Approximate measurements

Shrek

Mini 54.96mm x 57.5mm x 26mm

Midi 68.7mm x 71.87mm x 28mm

Regular 82.44mm x 86.25mm x 32mm

Large 91.5mm x 95.8mm x 32mm

Fiona

Mini 54.49mm x 71.13mm x 26mm

Midi 74.3mm x 83.35mm x 30mm

Regular 89.16mm x 100mm x 32mm

Large 99mm x 111.1mm x 32mm

Donkey

Mini 43.15mm x 63.87mm 26mm

Midi 59.67mm x 88.34mm x 28mm

Regular 68.8mm x 101.9mm x 32mm

Large 78mm x 115.5mm x 32mm

Pinocchio

Mini 55.88mm x 61.50mm x 26mm

Midi 78.22mm x 86.10mm x 28mm

Regular 94.9mm x 104.5mm x 32

Large 100.58mm x 110.7mm x 32mm

Gingerbread Guy

Mini 42.45mm x 65.1mm x 26mm

Midi 59.43mm x 91.14mm x 28mm

Regular 72mm x 110.6mm x 32mm

Large 80.75mm x 123.69mm x 32mm

Cat

Mini 57.5mm x 62.25mm x 26mm

Midi 69mm x 74.7mm x 28mm

Regular 86.29mm x 93.38mm x 32mm

Large 97.7mm x 105.8mm x 32mm

Prince

Mini 55.11mm x 58.62mm x 26mm

Midi 67mm x 71.3mm x 28mm

Regular 82.66mm x 87.93mm x 32mm

Large 91.8mm x 97.7mm x 32mm

Swamp Sign

Mini 49mm x 49.69mm x 26mm

Midi 63.8mm x 64.59mm x 28mm

Regular 85.5mm x 84.4mm x 32mm

Large 93.3mm x 94.4mm x 32mm

This mold does not come with a sleeve.

Our molds are made of PLA. PLA stands for Polyactic Acid and is a thermoplastic polymers in that it is derived from renewable resources like corn starch or sugar cane.

Printing Defects - Sometimes there might be slight discoloration, or a slight printing defect. This will not affect the performance of the molds.

Cleaning your mold is as easy as rinsing under cool water, and towel dry. Never soak your molds as they can retain water. Do not place your molds in the dishwasher. PLA is susceptible to heat, so please do not use warm or hot water.

We do not offer refunds or cancellations on any orders. If you have any issues with any item, please contact us directly, and we will work with you. If you have any quality issues, please contact us directly.

To use: Add your bath bomb mixture to mold gently pushing the mixture into the details then finish by adding embeds etc then filling the remaining mixture until the mold is slightly over filled and using a flat scraper remove the excess until you have a flat surface. (I personally like a smooth bottom and I rub the back of the bath bomb with my hand). Either tap gently with the back of a spoon or wooden stick while holding or lying on a flat surface. There is a unique sound once the bath bomb releasees from the mold and then you can lift the mold straight up to expose a beautifully formed bath bomb. Us