All molds are made to order.

Approximate measurements

Diamond

Midi 61.67mm x 55.38mm x 30mm

Regular 85.4mm x 76.68mm x 32mm

Droplet

Midi 62.5mm x 71.3mm x 30mm

Regular 72.7mm x 98.8mm x 32mm

Double Point

Midi 53.1mm x 67.7mm x 30mm

Regular 73.6mm x 93.7mm x 32mm

Square Cut

Midi 51mm x 51mm x 30mm

Regular 72.9mm x 72.9mm x 32mm

Hexagon Cut

Midi 56.1mm x 62.58mm x 30mm

Regular 77.77mm x 86.66mm x 32mm

Happy Eight Cut

Midi 59.3mm x 59.3mm x 40mm

Regular82.2mm x 82.2mm x 32mm

Curved Diamond

Midi 65.6mm x 50.2mm x 30mm

Regular 101mm x 77.3mm x 32mm

You have the option to purchase as a set or individually.

This mold does not come with a sleeve.

Our molds are made of PLA. PLA stands for Polyactic Acid and is a thermoplastic polymers in that it is derived from renewable resources like corn starch or sugar cane.

Printing Defects - Sometimes there might be slight discoloration, or a slight printing defect. This will not affect the performance of the molds.

Cleaning your mold is as easy as rinsing under cool water, and towel dry. Never soak your molds as they can retain water. Do not place your molds in the dishwasher. PLA is susceptible to heat, so please do not use warm or hot water.

We do not offer refunds or cancellations on any orders. If you have any issues with any item, please contact us directly, and we will work with you. If you have any quality issues, please contact us directly.

To use: Add your bath bomb mixture to mold gently pushing the mixture into the details then finish by adding embeds etc then filling the remaining mixture until the mold is slightly over filled and using a flat scraper remove the excess until you have a flat surface. (I personally like a smooth bottom and I rub the back of the bath bomb with my hand). Either tap gently with the back of a spoon or wooden stick while holding or lying on a flat surface. There is a unique sound once the bath bomb releasees from the mold and then you can lift the mold straight up to expose a beautifully formed bath bomb.