Approximate measurements

Midi 39mm x 66mm x 21mm(pre side half) sleeve size 40mm

Regular 52mm x 88mm x 28mm(pre side half ) sleeve depth 45mm

Large 65mm x 110mm x 35mm(pre side half) sleeve depth 52mm

This mold does comes with 3 3d printed pieces(a sleeve, a top and a bottom plate).

All molds are made to order, for information on processing time click here. Our molds are made of PLA. PLA stands for Polyactic Acid and is a thermoplastic polymers in that it is derived from renewable resources like corn starch or sugar cane.

Policies: Printing Defects - Sometimes there might be slight discoloration, or a slight printing defect. This will not affect the performance of the molds. We do not offer refunds or cancellations on any orders. If you have any issues with any item, please contact us directly, and we will work with you.  If you have any quality issues, please contact us directly.

Care

Cleaning your mold is as easy as rinsing under cool water, and towel dry. Never soak your molds as they can retain water. Do not place your molds in the dishwasher. PLA is susceptible to heat, so please do not use warm or hot water.

How to use:  Place one piece(Plate) into the sleeve placing some mixture into the cavities you can add embeds or super tiny toys and then add more mixture, then press firmly to compress the mold together making for a firm product. Tap all around the sides (this will help loosen the sleeve from the plates( and remove the top plate. At this point I turned the sleeve and the bottom plate over and they fall out but if they don’t I will lightly tap until it does.