***Note all Molds are made to order.***

Approximate measurements

1 inch

29.34mm x 29.34mm x 39mm

1.25 inch round

36mm x 36mm x 48mm

1.5 inch

42.66mm x 42.66mm x 56mm

1.75 inch

49.32mm x 49mm x 65mm

2 inch

55.98mm x 55.98mm x 74.64mm

2.25 inch

62.64mm x 62.64mm x 83mm

2.5 inch

69.3mm x 69.4mm x 92.4mm

2.75 inch

75.96mm x 75.96mm x 101.28mm

3 inch

82mm x 82.62mm x 50.5mm

This mold does comes with 3 3d printed pieces(a sleeve, a top and a bottom plate).

All molds are made to order, for information on processing time click here. Our molds are made of PLA. PLA stands for Polyactic Acid and is a thermoplastic polymers in that it is derived from renewable resources like corn starch or sugar cane.

Policies: Printing Defects - Sometimes there might be slight discoloration, or a slight printing defect. This will not affect the performance of the molds. We do not offer refunds or cancellations on any orders. If you have any issues with any item, please contact us directly, and we will work with you.  If you have any quality issues, please contact us directly.

Care

Cleaning your mold is as easy as rinsing under cool water, and towel dry. Never soak your molds as they can retain water. Do not place your molds in the dishwasher. PLA is susceptible to heat, so please do not use warm or hot water.

How to use:  Place one piece(Plate) into the sleeve placing some mixture into the cavities you can add embeds or super tiny toys and then add more mixture, then press firmly to compress the mold together making for a firm product. Tap all around the sides (this will help loosen the sleeve from the plates( and remove the top plate. At this point I turned the sleeve and the bottom plate over and they fall out but if they don’t I will lightly tap until it does.