Each mold will come with 4 toxic cans to fill.

You will be able to Purchase more cans also.

Will be printed in 2 colours or single.

Please put in comments which colour you would like for the raised lettering.

Please check drop down menu for quality pricing.

Cans measure

70.85mm x 70.85mm x 90.72mm

There will be some unevenness in the printing on the letters as this gives it a more authentic look.

This mold does not come with a sleeve.

Our molds are made of PLA. PLA stands for Polyactic Acid and is a thermoplastic polymers in that it is derived from renewable resources like corn starch or sugar cane.

Printing Defects - Sometimes there might be slight discoloration, or a slight printing defect. This will not affect the performance of the molds.

Cleaning your mold is as easy as rinsing under cool water, and towel dry. Never soak your molds as they can retain water. Do not place your molds in the dishwasher. PLA is susceptible to heat, so please do not use warm or hot water.

We do not offer refunds or cancellations on any orders. If you have any issues with any item, please contact us directly, and we will work with you. If you have any quality issues, please contact us directly.

To use: Add your bath bomb mixture to mold gently pushing the mixture into the details then finish by adding embeds etc then filling the remaining mixture until the mold is slightly over filled and using a flat scraper remove the excess until you have a flat surface. (I personally like a smooth bottom and I rub the back of the bath bomb with my hand). Either tap gently with the back of a spoon or wooden stick while holding or lying on a flat surface. There is a unique sound once the bath bomb releasees from the mold and then you can lift the mold straight up to expose a beautifully formed bath bomb.