***Note all Molds are made to order.***

Multi Mini

Approximate measurements per piece

35mm x 50mm

150mm x 59mm x 28mm

5.91 in x 2.32 in x 1.1 in

Multi Midi

Approximate measurements per piece

40mm x 70mm

195mm x 76.7mm x 35mm

7.68in x 3.02in x 1.38in

This mold does not come with a sleeve.

Our molds are made of PLA. PLA stands for Polylactic Acid, a thermoplastic polymer derived from renewable resources like corn starch or sugar cane.

Printing Defects - Sometimes there might be slight discoloration or a slight printing defect. This will not affect the performance of the molds.

Cleaning your mold is as easy as rinsing under cool water, and towel drying. Never soak your molds as they can retain water. Do not place your molds in the dishwasher. PLA is susceptible to heat, so please do not use warm or hot water.

We do not offer refunds or cancellations on any orders. If you have any issues with any item, please contact us directly, and we will work with you. If you have any quality issues, please contact us directly.

To use: Add your bath bomb mixture to the mold gently pushing the mixture into the details then finish by adding embeds etc then fill the remaining mixture until the mold is slightly overfilled using a flat scraper remove the excess until you have a flat surface. (I like a smooth bottom and I rub the back of the bath bomb with my hand). Either tap gently with the back of a spoon or wooden stick while holding or lying on a flat surface. There is a unique sound once the bath bomb releases from the mold and then you can lift the mold straight up to expose a beautifully formed bath bomb.

Materials

Our molds are made of PLA. PLA stands for Polylactic Acid and is a thermoplastic polymer in that it is derived from renewable resources like corn starch or sugar cane.